| Version |
item / description |
release |
| 6.1.17 |
<Add applicable models>
<Bug fix>
- Fixed a bug in which the test pattern would become dark and feature point detection would fail when Dynamic Contrast NX was turned on for PT-MZ20K series.
|
11.Jul.2025 |
| 6.1.13 |
<Bug fix>
- Fixed a problem in which Quad Pixel Drive was forcibly turned OFF when a Crosshatch test pattern was selected on the confirmation screen after Geometry + Edge Blending adjustment was completed.
|
24.Oct.2024 |
| 6.1.12 |
<Add applicable models>
- PT-RQ7/ RQ6, PT-FRQ75C/ FRQ65C
- When connecting to these models, it is not possible to adjust only the Black Level.
<Bug fix>
- Fixed a bug where a communication error would occur if you select [Back to Screen Setting] after completing Geometry+Edge Blending adjustment when connecting to the REQ series.
- Corrected an error in intermediate data generation processing during geometric distortion correction adjustment when connected to PT-RQ50K.
|
11.Sep.2024 |
| 6.0.12 |
<Add applicable models>
- PT-REQ15, PT-REZ15, PT-FEQ150C, PT-FEZ150C
- PT-SRZ33KC
<Add & Improve function>
- Reviewed adjustment procedure, make it easier to re-execute adjustment and change parameters mid-way.
- By displaying the coordinate detection results for each camera before starting adjustment, it is possible to review camera settings and placement.
- Added support for cross cursor placement to correct geometric distortion from the camera perspective.
- When performing geometric adjustment using multiple cameras, it is possible to display the composite image taken by those cameras and place the cross cursor on that screen.
- Add applicable camera : Nikon Z5.
<Bug fix>
- Fixed a bug where the "Loading..." display would sometimes freeze after automatic adjustment was completed.
- Fixed a bug where the edge blending setting wold remain OFF after color adjustment was completed.
<Additionally Support or Discontinue compatible OS>
- Support for 32bit versions of Windows has ended, and only 64bit versions will be supported.
|
24.May.2024 |
| 5.7.15 |
<Add applicable models>
- PT-REZ12/REZ10/REZ80, PT-FEZ120C/FEZ100C/FEZ080C
- PT-RZ14K
<Add & Improve function>
- Add applicable camera : Nikon Z50.
|
21.Jul.2023 |
| 5.6.16 |
<Add applicable models>
- PT-REQ12/REQ10/REQ80, PT-FEQ120C/FEQ100C/FEQ080C
- PT-MZ20K, PT-SMZ20KC
<Add & Improve function>
- Added display of thumbnail images along with the option strings in the test pattern selection after adjustment.
|
21.Apr.2023 |
| 5.5.20 |
<Add applicable models>
- PT-MZ17K/MZ14K/MZ11K, PT-SMZ17KC/SMZ14KC/SMZ11K
<Add & Improve function>
- Changed the camera shutter speed lower limit to 1/15 for LCD models when performing color adjustment.
|
21.Dec.2022 |
| 5.4.18 |
<Add applicable models>
- PT-RQ25K/RQ18K, PT-SRQ25KC/SRQ18KC
- PT-RZ24K/RZ17K, PT-SRZ24KC/SRZ17KC
<Add & Improve function>
- Support the black level adjustment function including outside the image display area after geometric correction. (compatible models only)
<Bug fix>
- Fixed a bug that caused the application to terminate abnormally when transferring data after adjustment was completed for a specific model.
- Fixed an issue where both the Before and After check boxes could be selected on the before/after comparison screen that was displayed after each adjustment for Color Matching, White Balance, and Black Level was completed.
|
21.Oct.2022 |
| 5.3.10 |
<Add & Improve function>
- Supported new application icon.
- Added an error message when the camera lens is collapsed.
|
28.Apr.2022 |
| 5.2.11 |
<Add & improve function>
- Monochrome pattern can be selected in addition to the conventional color pattern for the coordinate detection according to the screen characteristics and camera layout (compatible models only).
- *compatible models: PT-RQ50K, PT-RQ35K, PT-RZ34K, PT-RQ22K, PT-RZ21K/RS20K, PT-RZ16K, PT-RCQ10/RCQ80,
PT-RZ120, PT-RZ990/RZ890/RZ790/RZ690, PT-MZ16K/MZ13K/MZ10K
- Simplified activation procedure for ET-CUK10P.
- Added support for disabling (deactivation) ET-CUK10P activated by a simplified procedure.
This makes it possible to transfer the deactivated license to another PC.
- *ET-CUK10P activated by the conventional procedure is not applicable.
<Bug fix>
- Fixed a bug that data may be lost when transferring Geometry adjustment data of multiple projectors.
|
15.Nov.2021 |
| 5.1.10 |
<Add & improve function>
- Add applicable camera : Nikon D7500.
|
20.Jul.2021 |
| 5.1.8 |
<Add & improve function>
- Changed to check if the installed Geometry Manager Pro is the correct version at startup.
|
20.May.2021 |
| 5.0.29 |
<Add & improve function>
- Supports projector function improvements and specification changes :
- Black level free shape adjustment (PT-RQ50K, PT-RQ22K, PT-RZ21K/RS20K, PT-RZ16K)
- *The above functions are available when the firmware version of the projector is these or later.
- PT-RQ50K: ver.3.03
- PT-RQ22K: ver.5.02
- PT-RZ21K/RS20K: ver.4.03
- PT-RZ16K: ver.2.02
<Bug fix>
- Fixed a bug that caused a cursor placement error even if the cursor was placed property on a 360-degree screen.
|
4.Mar.2021 |
| 5.0.17 |
<Add applicable models>
- PT-RQ35K/RZ34K/RZ16K, PT-SRQ35KC/SRZ34KC
<Function restriction>
- Panasonic cameras can only be used with Live View function.
<Add & improve function>
- Added support for black level free shape adjustment function (PT-RQ35K/RZ34K only).
|
30.Nov.2020 |
| 4.4.6 |
<Add applicable models>
- PT-RZ990/RZ890/RZ790/RZ690, PT-FRZ99C/FRZ89C/FRZ79C/FRZ69C
|
5.Aug.2020 |
| 4.3.29 |
<Bug fix>
- Fixed a bug that margin setting for PT-RQ50K was invalid.
- Fixed the problem of vertical coordinate calculation in geometric correction for PT-RQ50K.
- Fixed a bug that the data saved in the processing of saving geometric correction data when adjusting the Black Level was incorrect.
- Fixed a bug that the application screen after adjustment was irregular when saving geometric correction data by adjusting the Black Level from the state of Geometry=OFF.
- Fixed a bug that caused an error outside the area range when performing geometric correction on a 360 degree screen.
- Fixed a bug that Edge Blending setting was incorrect while adjusting Black Level on 360 degree screen.
|
6.Apr.2020 |
| 4.3.18 |
<Add applicable models>
- PT-RCQ10/ RCQ80, PT-MZ16K/ MZ13K/ MZ10K, PT-RQ50K
<Add & improve function>
- Color Matching : enable to select a projector that is to be the target.
- Support for the enlarged display functin of Live View video & Test Shot image.
- Changed the screen type "4 Corner" to "Flat", and even when "Flat" is selected, the number of cross cursors other than 2x2 can be selected.
|
7.Nov.2019 |
| 4.2.4 |
<Add & improve function>
- Review error messages when the camera search fails.
<Bug fix>
- Fixed error handling during Black Level adjustment for PT-RQ13K.
|
19.June.2019 |
| 4.2.2 |
<Add & improve function>
- When using multiple cameras, it was changed to be treated as an error when starting adjustment with 4Corner selected as the Screen Type.
<Bug fix>
- Fixed a bug that could cause connection error during camera setup.
- Fixed a bug that the focus shifts while adjusting with PTZ camera.
- Fixed a bug that an error out of the area range occurs when the margin is set to the left and right.
|
13.May.2019 |
| 4.1.9 |
<Add applicable models>
<Add & improve function>
- Add applicable camera : AW-UN70, AW-HN70, AW-HN40, AW-HN38
- Live View : corresponded to long press operation of Pan / Tilt / Zoom button. (for Panasonic Integrated camera only)
- Live View : changed the driving amount of manual focus operation. (for Nikon camera only)
- Adjustment can be selected without changing the setting of Picture Gamma, Brightness Control Gain and Light Output.
- By using the preset function to virtually increase the number of cameras, it is possible to adjust with fewer cameras. (for Panasonic integrated camera only)
|
23.Oct.2018 |
| 4.0.22 |
<Add applicable models>
<Add & improve function>
- Add applicable camera : Panasonic integrated camera
AW-UE70, AW-UE65, AW-UE63, AW-HE70, AW-HE40, AW-HE38, AW-HE35
- The processing order is partially replaced because compatible cameras are
added.
- Black Level Adjustment : support multiple cameras.
- Correspond to operation by XInput compatible game pad.
- Add new finction : Live View
- Review the activation process of ET-CUK10P.
|
22.Aug.2018 |
| 3.0.21 |
<Add applicable models>
- PT-RZ870, PT-FRZ88C, PT-SXP10K10
|
17.Jul.2018 |
| 3.0.20 |
<Add applicable models>
<Bug fix>
- Fixed a bug the black level correction may not work correctly in some cases.
|
15.Nov.2017 |
| 3.0.14 |
<Add applicable models>
- PT-RZ21K/ RS20K, PT-SRZ21KC/ SRS20KC
<Add & improve function>
- Increase maximum number of cross cursors while selecting horizontal/vertical
curved screen.(32→100)
- Support Black Level Adjustment.
|
9.Nov.2017 |
| 2.3.13 |
<Add & improve function>
- Add applicable camera : Nikon D5600
- Support new camera firmware [C] Ver.1.02 (for Nikon D5500)
- Add countermeasure against camera exposure error under specific condition.
- When using multiple cameras, the problem with incorrect camera being connected
is corrected.
- Review the processing when communication error with the projector occurred
during auto adjustment.
|
18.Jul.2017 |
| 2.3.10 |
<Add applicable models>
<Add & improve function>
- When using multiple cameras, shooting results in Auto Setup are displayed as a list.
- When the geometric correction can not be executed, the list of the corresponding projectors is displayed.
- Geometry : the cursor position can be saved / selected three times in the past.
- Geometry : add countermeasure against camera exposure adjustment error.
- Color Matching / White Balance Correction : add the comparison before and after correction result.
- Add applicable camera lens : AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR
|
16.Jan.2017 |
| 2.2.11 |
<Add applicable models>
- PT-RZ31K/ RS30K, PT-SRZ31KC/ SRS30KC
|
2.Nov.2016 |
| 2.1.13 |
<Add & improve function>
- Geometry : enable to select whether or not to continue auto adjustment by changing the setting of projector when geometric adjustment can not be executed.
|
31.Aug.2016 |
| 2.1.9 |
<Add applicable models>
- PT-RZ970, PT-FRZ98C
- PT-RZ770/ RZ660, PT-FRZ78C
<Add & improve function>
- Increase maximum number of cross cursors. (99→300)
(Because number of cursor that can be displayed on the projector is limited to two digits, the display of cross cursor is switched at 100 units.)
- Enable to select whether or not to set Black level setting.
- Add required runtime automatically during installation.
- Support new camera firmware [C] Ver.1.01 (for Nikon D5500/D5300)
<Additionally Support or Discontinue compatible OS>
- Discontinue Microsoft Windows 8
- Additionally support Microsoft Windows 10
|
17.Jun.2016 |
| 2.0.16 |
<Add applicable models>
<Add & improve function>
- Increase maximum number of simultaneous connections. (64→99)
- Support using multiple cameras. (up to 6)
- Increase maximum horizontal or vertical number of projector. (up to 19)
(The maximum number of projector will change depending on the number of cameras.)
- Add applicable screen (360-degreee screen)
|
16.Nov.2015 |
| 1.3.22 |
<Add applicable models>
- PT-DZ21K2/ DS20K2, PT-SDZ21K2C/ SDS20K2C
- PT-RZ12K/ RS11K, PT-SRZ12KC/ SRS11KC
<Add & improve function>
- Geometry / Edge Blending : add applicable screen (two-axis curved screen).
- Geometry / Edge Blending : possible to set the margin of content.
- Add new function : white balance adjustment.
- Add a mode to re-run the adjustments made last time.
- GUI update
- Change the design of the startup screen of Auto Screen Adjustment function.
- Add applicable camera : Nikon D5500
|
29.Jul.2015 |
| 1.2.9 |
<Add applicable models>
- PT-DZ780, PT-FDZ88C/FDZ675CB
<Add & improve function>
- Increase maximum number of simultaneous adjustment (48⇒64)
- Increase maximum number of stacking (3⇒6)
- Edge Blending : add the function to automatically adjust overlap width.
- Color Matching : review the operation at the time of re-execution of the case that do not converge.
- The camera can also correctly adjust has been 90, 180, and 270 degrees with respect to the image.
- Perform the optimal camera white balance adjustment.
- Improve the search and extraction algorithm of the screen area.
- Changed to issue a warning message when starting at the time of this plug-in not installed.
|
17.Apr.2015 |
| 1.1.10 |
<Add applicable models>
<Add & improve function>
- Allow adjustment even in different models, if the same resolution
- GUI update
Easy to understand the number of stack in the layout screen and progress bar
Add icons to warning/error message dialog
Immediately after transition to screen setting screen,change all cursors to unselected
Improved the problem that move when you click the cursor
- Geometry + Edge Blending : during selection of storage area, enable to cancel
- When running only "Color Matching", change projected images to "side-by-side" based on the edge blending setting
|
17.Sep.2014 |
| 1.0.26 |
<1st release>
- Release as a plug-in of Geometry Manager Pro Ver.2.0 or later
<Key Feature>
- Geometry Correction/Edge Blending/Stacking
(Applicable screen : flat, curved in one direction)
- Color and Brightness adjustment
color and brightness adjustment relatively using color matching function (7colors)
|
10.Apr.2014 |