Update history

Main
Version		 - Items / Applicable models / Details Updated
date
4.08 Item Improvement of freeze function 2015/4/1
Model PT-DZ13K/DS12K/DW11K/DZ10K
PT-SDZ985C/SDS955C/SDW935/SDZ981C
Detail Originally a temporarily black screen appeared during the transition from the moving picture to the still picture or vice versa. With this update, this black screen has been removed.
4.07 Item
  • Correction for OSD menu font
  • Improvement for lens adjustment usability
    Adjustment Step Remark
    Small button Middle button Large button
    Shift 1 step 15 steps 225 steps Lens is moved from center to end by pressing the large button about 7 times.
    Focus 1 step 11 steps 121 steps Lens is moved from center to end by pressing the large button about 10 times.
    Zoom 1 step 8 steps 64 steps Lens is moved from center to end by pressing the large button about 9 times.
  • Improvement of screen flicker with Interlace signal
2015/1/26
Model PT-DZ13K/DS12K/DW11K/DZ10K
PT-SDZ985C/SDS955C/SDW935/SDZ981C
Detail
  • Width of some OSD menu fonts is narrower than other fonts. This has been improved.
  • Lens adjustment is done by PC with three buttons of large, medium and small. The steps for each button are changed for usability.
  • During IP conversion, screen flicker might occur occasionally.
4.06 Item Correction for Lens position display 2014/10/30
Model PT-DZ13K/DS12K/DW11K/DZ10K
PT-SDZ985C/SDS955C/SDW935/SDZ981C
Detail The lens position displayed on the screen during lens shifting operation shows incorrect value.
This issue only occurs with main version 4.04. This has been improved.
4.04 Item Function addition 2014/10/9
Model PT-DZ13K/DS12K/DW11K/DZ10K
PT-SDZ985C/SDS955C/SDW935/SDZ981C
Detail Backup input function added
  • The projector has been equipped with the function that automatically switches to the backup input of the same signal when the projecting image signal is disrupted.
The addition of lens shift adjustment function for the fixed-focus lens ET-D75LE90.
  • The projector has been equipped with the function that automatically moves the lens position of the fixed-focus lens ET-D75LE90 to the standard projection position.
4.03 Item Improvement for Keystone 2014/7/7
Model PT-DS12K, PT-SDS955C
Detail When using the projector with Keystone, top and bottom position of screen are missing slightly. This has been improved.
Note When KEYSTONE is already set to ON, please set the menu as follows and activate this improvement.
<Procedure>
1. Set [GEOMETRY] menu from [KEYSTONE] to [OFF].
2. Set [GEOMETRY] menu to [KEYSTONE] again.
<Caution>
When this improvement is activated, screen position is shifted.
Please adjust keystone once again.
3.00 Item "ET-CUK10: Auto Screen Adjustment Upgrade Kit"*1*2 Capability 2014/4/10
Model PT-DZ13K/DS12K/DZ10K
PT-SDZ985C/SDS955C/SDZ981C
Detail ET-CUK10 to a projector expands the functions of the Geometric & Setup Management Software (Geometry Manager Pro), and allows automatic adjustment of geometry correction, edge blending, color, and brightness according to the shape of the screen through use of an externally connected camera*3
Note
  • *1 Available to use world wide other than United States.
  • *2 "ET-CUK10" works as an upgraded function of "Geometry Manager Pro".
  • *3 Applicable cameras: D5200 / D5300 (Nikon) or successor model.
2.04 Item Improvement for lamp runtime display 2014/01/16
Model PT-DZ13K/DS12K/DW11K
PT-SDZ985C/SDS955C/SDW935C
Detail When using the projector with the following setting, the "LAMP2" runtime display in the STATUS menu was a little longer than the actual time. This has been improved.
[ Setting : "LAMP SELECT = DUAL" and "LAMP POWER = HIGH" ]
2.02 Item Improvement for Geometry correction data saving 2013/11/18
Model PT-DZ10K, PT-SDZ981C
Detail When using PT-DZ10K/SDZ981C, the adjustment data saved in to the projector by "Geometry Manager Pro" was cleared after power OFF/ON, and it has been improved.
2.00 Item Portrait mode Capability 2013/05/21
Model PT-DZ13K/DS12K/DW11K/DZ10K
PT-SDZ985C/SDS955C/SDW935C/SDZ981C
Detail New Portrait mode allows portrait projection with PT-DZ13K Series by mounting the optional ET-LAD320P or ET-LAD320PW lamp unit.
Note
  • Please contact the sales representative with regard to the frame for portrait operation. Installing is possible only with the terminal side facing downward.
  • Main firmware version of projector is required to be 2.0 (this firmware) or later.
  • The lamp replacement cycle becomes 500 hours, and this cycle is affected by the usage environment.
  • In portrait mode, the maximum brightness becomes 10,600 lm (for PT-DZ13K/DS12K/DZ10K, PT-SDZ985C/SDS955C/SDW935C/SDZ981C) or 9,600lm (for PT-DW11K, PT-SDW935C).