Update history

Main
Version		 - Items / Applicable models / Details Updated
date
[Note] For details on each update item, visit the following Panasonic website and download the latest Operating Instructions.
Manual - Panasonic Projector Product Database  		 -
3.05 Item
  • Improvement for fine lens adjustment usability with the remote controller and the control panel of projector
  • Improvement for lens adjustment usability
2015/11/24
Model PT-DZ870/DW830/DX100
PT-FDZ97C/FDW93C/FDX100C
Detail
  • When you hold the shift button, Lens will move slowly for first few seconds.
    This low-speed period is changed from 2 seconds to 6 seconds for usability of fin adjustment.
  • When change the moving direction to opposite side, the lens moving might be stopped a short time. This has been improved.
3.04 Item
  • Improvement of freeze function
  • Improvement for lens adjustment usability with Web browser control and Geometry Manager Pro
  • Improvement of screen flicker with Interlace signal
2015/5/27
Model PT-DZ870/DW830/DX100
PT-FDZ97C/FDW93C/FDX100C
Detail
  • Originally a temporarily black screen appeared during the transition from the moving picture to the still picture or vice versa. With this update, this black screen has been removed and the picture is switched without interruption. (3D display is excluded)
  • Lens adjustment is done by PC with three buttons of@large, medium and small. The steps for each button are changed for usability.
    Step
    Adjustment Small button Middle button Large button
    Shift 1 step 15 steps 225 steps
    Focus 20 msec. 100 msec. 500 msec.
    Zoom 20 msec. 100 msec. 500 msec.
  • During IP conversion, screen flicker might occur occasionally.
3.00 Item "ET-CUK10: Auto Screen Adjustment Upgrade Kit"*1*2 Capability 2014/4/10
Model PT-DZ870, PT-FDZ97C
Detail ET-CUK10 to a projector expands the functions of the Geometric & Setup Management Software (Geometry Manager Pro), and allows automatic adjustment of geometry correction, edge blending, color, and brightness according to the shape of the screen through use of an externally connected camera*3
Note
  • *1 Available to use world wide other than United States.
  • *2 "ET-CUK10" works as an upgraded function of "Geometry Manager Pro".
  • *3 Applicable cameras: D5200 / D5300 (Nikon) or successor model.
2.02 Item Improvement for a screen flicker 2013/12/20
Model PT-DZ870/DW830/DX100
PT-FDZ97C/FDW93C/FDX100C
Detail There was a case that the projection image flickers depending on the input signal. This has been improved.
2.00 Item Portrait mode Capability 2013/09/26
Model PT-DZ870/DW830/DX100
PT-FDZ97C/FDW93C/FDX100C
Detail New Portrait mode allows portrait projection with PT-DZ870 Series by mounting the optional ET-LAD320P or ET-LAD320PW lamp unit.
Note
  • Please contact the sales representative with regard to the frame for portrait operation. Installing is possible only with the terminal side facing downward.
  • Main firmware version of projector is required to be 2.0 (this firmware) or later.
  • Horizontal rotation and vertical rotation are both limited 15 degrees.
  • The lamp replacement cycle becomes 1,000 hours with the LAMP POWER set to NORMAL mode in dual lamp operation, and this cycle is affected by the usage environment.