| Version |
item / description |
release |
| 7.1.17 |
<Add applicable models>
<Bug fix>
- Fixed a bug that could cause activation failure for ET-CUK10P.
- Fixed a bug in writing back settings using PT-RQ7 series prj files contain masking data.
|
11.Jul.2025 |
| 7.1.13 |
<Add & improve function>
- Support new Media processor option board (ET-SBFMP10).
- Only the identification, input switching, and some functions (Startup Input Select, Secondary Input) of this board are supported.
- Note that the projector firmware must be updated to support this option board.
<Bug fix>
- Fixed a problem that could cause activation of ET-CUK10P using a file to fail.
|
24.Oct.2024 |
| 7.1.12 |
<Add applicable models>
- PT-RQ7/ RQ6, PT-FRQ75C/ FRQ65C
- When connecting to these models, "Other" tab is not available.
<Bug fix>
- Fixed a bug where the app would terminate abnormally with certain operations in Line Masking.
- Fixed a bug where the aspect ratio would collapse when the rotation angle is increased in the Geometry Rotation function.
|
11.Sep.2024 |
| 7.0.12 |
<Add applicable models>
- PT-REQ15, PT-REZ15, PT-FEQ150C, PT-FEZ150C
- PT-MZ882/MZ782/MZ682, PT-SMZ89C/SMZ85C/SMZ79C/SMZ75C/SMZ69C/SMZ60C/SMZ58CA
- PT-SRZ33KC
<Add & Improve function>
- Added a mechanism that allow to check the entered character string when entering the password required to connect to the projector.
- Compatible to connection with SDM SDI-Opt. board (TY-SB01FB).
<Bug fix>
- Fixed an issue where lens focus and zoom would not work with slider bar operations from the end of the adjustment range on some models.
<Additionally Support or Discontinue compatible OS>
- Support for 32bit versions of Windows has ended, and only 64bit versions will be supported.
|
24.May.2024 |
| 6.7.15 |
<Add applicable models>
- PT-REZ12/REZ10/REZ80, PT-FEZ120C/FEZ100C/FEZ080C
- PT-RZ14K
<Bug fix>
- Fixed a bug where the application would crash when opening the Geometry tab when while connected to certain model.
- Fixed a bug where the application would freeze when switching projectors using cursor keys while connected to certain model.
- Fixed a bug where the edge of the disaplay would be cut off while displaying the Edge Blending tab.
- Fixed a bug where the adjustment points would not move correctly during mouse operation in the out-of-range black correction function.
- Fixed a bug where there would be areas not masked on the application screen when zooming in to the maximum (8x) in Masking.
- Fixed a bug where the application display would not be correct when performing a Flip operation while having created a line with multiple adjustment points in Masking.
|
21.Jul.2023 |
| 6.6.16 |
<Add applicable models>
- PT-REQ12/REQ10/REQ80, PT-FEQ120C/FEQ100C/FEQ080C
- PT-MZ20K, PT-SMZ20KC
<Add & improve function>
- Added simultaneous search within the same subnet as the computer's NIC (Network Interface Controller) as a projector search method.
- When searching for projectors, display status even if the response from the projector is in an access forbidden state.
- Added display of thumbnail images along with the option strings in the test pattern selection.
- Reviewed the confirmation message when closing the application and reduced the number of messages displayed.
- Changed the initial grid number to 3x3 at startup.
- Added the function to specify the aspect ratio in Geometry adjustment.
- Expand the Masking function to enable the creation of lines with multiple adjustment points on each upper, lower, left and right sides.
- Enabled Export/Import of registered commands in Command Control function.
- Added Command Control launch button on the main screen.
<Bug fix>
- Fixed the issue where the image would be disrupted when adjusting in the Geometry Tab when connected to PT-RQ13K or PT-RQ32K.
- Fixed the issue where the application would crash when saveing data files while connected to multiple projectors.
|
21.Apr.2023 |
| 6.5.20 |
<Add applicable models>
- PT-MZ17K/MZ14K/MZ11K, PT-SMZ17KC/SMZ14KC/SMZ11KC
<Add & improve function>
- Available test patterns can be selected for each model. However, the application does not support transferring/renaming/deleting user test patterns.
- Added support for 1920x1080/240Hz signal. (PT-RQ25K/RQ18K *1)
- Added support for 21:9 aspect ratio signals(3440×1440/60Hz, 3440×1440/50Hz, 2560×1080/60Hz, 2560×1080/50Hz). (PT-RQ25K/RQ18K *1, PT-RZ24K/RZ17K *2)
- *1:The projector's firmware must be Ver.1.08 or later.
- *2:The projector's firmware must be Ver.1.09 or later.
<Bug fix>
- Fixed a bug that settings were not applied correctly when loading prj/prjs files saved with an older version of the application.
|
21.Dec.2022 |
| 6.4.18 |
<Add applicable models>
- PT-RQ25K/RQ18K, PT-SRQ25KC/SRQ18KC
- PT-RZ24K/RZ17K, PT-SRZ24KC/SRZ17KC
<Add & improve function>
- Support new Lens control UI (compatible models only)
- Support brightness control restart function (compatible models only)
- Support the black level adjustment function including outside the image display area after geometric correction. (compatible models only)
- Add a function to save the grid number in the application when storing Geometry data and reflect it at the next startup.
- Improve the method of selecting Uniformity correction area.
<Bug fix>
- Masking : Fixed a bug where the masked area on the application screen turned completely black when performing certain operations.
- Fixed a bug that the text part was displayed in black and white reversed on some tabs when the Display Theme was changed after the application was started.
|
21.Oct.2022 |
| 6.3.10 |
<Add & improve function>
- Supported new application icon.
- Added support for a changing function of the administrator settings.
<Bug fix>
- Command Control: Fixed a bug that the script transfer function does not work correctly with 3 or more commands.
- Command Control: Fixed a bub that ending the dialog with press Enter key or ESC key.
- Geometry : Changed to hold Alert Distortion for each of PC1, PC2 and PC3.
- Edge Blending : Fixed a bug that alert for invalid operation.
- Fixed the following bugs when connecting to RZ34K:
- Corrected the upper limit of color temperature to 13000K.
- Added HDR HLG System support to Gamma User1 and User2.
- Fixed the following bug when connecting to RQ50K:
- Corrected the corner correction parameters.
|
28.Apr.2022 |
| 6.2.11 |
<Add & improve function>
- Specification change of saved file data (Delete unnecessary/unused data).
- Improve visibility of Edge Blending area (Only for models where Edge Blending and Black Level Adjustment can be set in a separate tab).
- Supports projector function improvements and specification changes :
- Store the grid number and date & time when storing Geometry data (PT-RZ120)
<Bug fix>
- Uniformity : Fixed a bug that banding is visible on the application screen depending on the display magnification of the adjustment area.
- Uniformity : Fixed a bug that an uncorrected area appeared at the bottom of the application screen depending on the display magnification of the adjustment area.
- Fixed a bug that the position of the [AUTO ADJUST] button becomes incorrect when the Toolbar is changed from OFF to ON.
|
15.Nov.2021 |
| 6.1.10 |
<Bug fix>
- Edge Blending : Fixed a bug that the display position of the adjustment area shifts in the vertical direction.
- Edge Blending : Fixed a bug where values of Start, Width and Black Border are rounded to 1023.
|
20.Jul.2021 |
| 6.1.8 |
<Add applicable models>
- PT-MZ880/MZ780/MZ680, PT-SMZ88C/SMZ78C/SMZ68C/SMZ58C
<Bug fix>
- Fixed the following bugs when connecting to PT-RQ35K:
- Fixed incorrect choises of EDID Resolution/V Scan Freq. when inserting HDMI Op. bord.
- Fixed incorrect choises of HDMI EDID Resolution/V Scan Freq. when not activated with ET-SUK10.
- Fixed a bug that it works as if it is not activated even if it is activated with ET-SUK10.
- Fixed a bug that the application crashes due to the simplefied activation of ET-UK20 and ET-CUK10.
- Fixed a bug that simplified ET-UK20 and ET-CUK10 activation failed.
|
20.May.2021 |
| 6.0.27 |
<Add & improve function>
- Supports projector function improvements and specification changes :
- Masking (PT-RQ50K)
- Black level free shape adjustment (PT-RQ50K, PT-RQ22K, PT-RZ21K/RS20K, PT-RZ16K)
- Reset of Color Matching (PT-RQ50K, PT-RZ21K/RS20K, PT-RZ16K)
- Store the grid number and date & time when storing Geometry data (PT-RQ22K, PT-RZ21K/RS20K)
- Gradation Smoother (PT-RQ50K)
- 4K 120Hz signal (PT-RQ35K)
- *The above functions are available when the firmware version of the projector is these or later.
- PT-RQ50K: ver.3.03
- PT-RQ35K: ver.1.09
- PT-RQ22K: ver.5.02
- PT-RZ21K/RS20K: ver.4.03
- PT-RZ16K: ver.2.02
- Change the notation "Master/Slave" to "Main/Sub" (All models)
- Added support for data transfer mode (Manual or Auto) notation when software is started.
<Bug fix>
- Fixed a bug that did not match the security policy of the projector when "Command protect = Disable", and confirmed the validity of the user name & password when connecting to the projector.
|
4.Mar.2021 |
| 6.0.17 |
<Add applicable models>
- PT-RQ35K/RZ34K/RZ16K, PT-SRQ35KC/SRZ34KC
<Add & improve function>
- Simplified activation procedure for ET-UK20 and ET-CUK10.
- Changed the license information display of OSS (Open Souce Software).
- This software can be executed from MMCS (Multi Monitoring & Control Software).
- Added support for black level free shape adjustment function (PT-RQ35K/RZ34K only).
<Bug fix>
- Fixed a bug that bitmap masking data is not displayed correctly on the application screen.
- Fixed a bug that bitmap masking data is not displayed correctly on the application screen when line masking data is inverted while both bitmap masking and line masking are enabled.
|
30.Nov.2020 |
| 5.4.6 |
<Add applicable models>
- PT-RZ990/RZ890/RZ790/RZ690, PT-FRZ99C/FRZ89C/FRZ79C/FRZ69C
<Add & improve function>
- Add the error message when the administrator account of the projector is not set.
- When the projector is not connected, the text color of the projector in the projector list is changed to gray and the tool tip display when the mouse cursor is over is changed to "Not Connected".
|
5.Aug.2020 |
| 5.3.29 |
<Add & improve function>
- Support Lens Memory function of PT-MZ10K/ MZ13K/ MZ16K.
- Support new 12G-SDI Optical option board (ET-MDNFB10).
- Improved so that control commands can be issued almost simultaneously when multiple projectors are selected.(excluding [Power ON] button)
- Support Dual Link HDMI signals when HDMI option board (ET-MDNHM10) is inserted to PT-RQ50K.
<Bug fix>
- Geometry : fixed the problem that application screen becomes irregular when reloading when connecting with PT-RZ120 of main firmware Ver.2.00 or later.
|
6.Apr.2020 |
| 5.3.18 |
<Add applicable models>
- PT-RCQ10/ RCQ80, PT-MZ16K/ MZ13K/ MZ10K, PT-RQ50K
<Add & improve function>
- Changed Auto Transfer setting to be saved when the application is closed and reflected at the next startup.
- Changed so that the direction of the image can be specified for each projector.
- Geometry : add the function to save the grid number and date & time when storing Geometry data.
- Geometry : support for the projector's Free Grid correction.
Add Free Grid data display and import function stored in PC-1 to PC-3
|
7.Nov.2019 |
| 5.2.2 |
<Add & improve function>
- Support new Display Port option board (ET-MDNDP10).
- Enabled to check projector list even if computer display resolution is low.
- Changed not to delete from the projector list even if the projector is disconnected.
- Geometry, Uniformity, Masking : display a mark that shows the direction of the projected image.
|
13.May.2019 |
| 5.1.6 |
<Add applicable models>
<Add & improve function>
- Uniformity : when "Chroma Only" is selected, the application screen is switched in conjunction.
- Geometry : fixed an issue that dust was displayed on the projection screen when geometric adjustment was executed.
|
23.Oct.2018 |
| 5.0.13 |
<Add applicable models>
<Add & improve function>
- Correspond to color scheme (dislay theme) switching of application screen.
- Geometry, Edge Blending, Uniformity, Masking : supported for portrait display.
- In arbitrary control command send / registration function, it is possible
to send multiple control commands at once.
- Improve display contents of Status of brightness control.
- Correspond to display saved value of lens memory. (Applicable models only)
- Geometry : correspond to operation by XInput compatible game pad.
|
22.Aug.2018 |
| 4.0.10 |
<Add applicable models>
- PT-RZ870, PT-FRZ88C, PT-SXP10K10
|
17.Jul.2018 |
| 4.0.9 |
<Add applicable models>
<Add & improve function>
- Support new 12G-SDI option board (ET-MDN12G10).
- Support new option lens for 3chip DLP (ET-D3 series).
<Bug fix>
- Fixed a bug that activation of ET-UK20 and ET-CUK10 does not operate properly
for PT-RQ32K, PT-RZ31K and PT-RS30K.
|
15.Nov.2017 |
| 4.0.5 |
<Add applicable models>
- PT-RZ21K/ RS20K, PT-SRZ21KC/ SRS20KC
<Add & improve function>
- Lens Settings: Lens Type, Lend ID, Lens Name and Active Focus Optimizer
function.
- Uniformity: Flexible Correction settings, Generate from Geometry.
- Tools submenu: Command Control Function, Register multiple control commands
and send them to multiple projectors simultaneously.
|
9.Nov.2017 |
| 3.3.9 |
<Add & improve function>
- Change dialog size of version display because of addition of the applicable
camera.
|
18.Jul.2017 |
| 3.3.6 |
<Add applicable models>
|
16.Jan.2017 |
| 3.2.7 |
<Add applicable models>
- PT-RZ31K/ RS30K, PT-SRZ31KC/ SRS30KC
<Add & improve function>
- Revise specification of the activation of auto screen adjustment upgrade kit (PC) (ET-CUK10P)
- Strengthen the validity check function of the key code
- Avoid a new volume serial generated at the time of the same key code input
- Change UI of Lens Setting (Web Control similar design, only connecting to PT-RZ31K/RS30K, PT-SRZ31K/SRS30K)
|
2.Nov.2016 |
| 3.1.4 |
<Add applicable models>
- PT-RZ970, PT-FRZ98C
- PT-RZ770/ RZ660, PT-FRZ78C
<Add & improve function>
- Add projector search function
<Additionally Support or Discontinue compatible OS>
- Discontinue Microsoft Windows 8
- Additionally support Microsoft Windows 10
|
17.Jun.2016 |
| 3.0.6 |
<Add compatible models>
<Add PC-based auto screen adjustment function>
- Activation function of auto screen adjustment upgrade kit(PC) (ET-CUK10P)
<Add & improve function>
- Increase maximum number of simultaneous connections (64→99)
- Sort of projectors arranged in the list
- Save to a file connection information only
- Startup screen: restore only connection state from file
- Geometry, Uniformity, Masking：add zoom rate of editing area (x1/8)
- GUI update : change layout of the item and parameters
|
16.Nov.2015 |
| 2.3.9 |
<Add applicable models>
- PT-DZ21K2/ DS20K2, PT-SDZ21K2C/ SDS20K2C
- PT-RZ12K/ RS11K, PT-SRZ12KC/ SRS11KC
|
29.Jul.2015 |
| 2.2.6 |
<Add applicable models>
- PT-DZ780, PT-FDZ88C/FDZ675CB
|
17.Apr.2015 |
| 2.1.2 |
<Add applicable models>
|
17.Sep.2014 |
| 2.0.25 |
<Add auto screen adjustment function>
- Support auto screen adjustment function
- available function : gemetriy correction/edge blending/stacking/color
and brightness correction
- Activation function of auto screen adjustment upgrade kit (ET-CUK10)
<Improve function>
- Activation to multiple projector collectively
- Increase maximum number of simultaneous connections (32→64)
- Geometry : expand the correction range
<Additionally Support or Discontinue compatible OS>
- Discontinue Microsoft Windows® XP and Microsoft Windows Vista®
- Additionally support Microsoft Windows® 8.1
|
10.Apr.2014 |
| 1.2.5 |
<Improve keycode operation>
- Unnecessary to enter a keycode to the software
<Support the functional update of PT-DZ21K/DS20K>
- Geometry/Masking : support 3 memories
- Masking : improve handling of line masking data
- Edge Blending : change of wording, add functional improvement (keystone
correction)
|
23.Oct.2013 |
| 1.1.21 |
<Add compatible models>
- PT-DZ13K/DS12K/DZ10K, PT-DZ870
<Add & improve function>
- Geometry : import from parameters of OSD menu (keystone/corner correction/curved)
- Geometry : lock of control points
- Masking : simultaneous use of bitmap masking and line masking
- Masking : expand maximum resolution and moving area of bitmap data
- Uniformity : user operability
- Add "delete" function of lens memory
- Improve projector list (display model number and resolution in the tooltip)
- Support grid/cursor function in addition to geometry correction
- Simultaneous control of multiple projector (power, shutter, test pattern
and so on)
- Improve save and load setting data
<Addtionally Support compatible OS>
|
19.Apr.2013 |
| 1.0.35 |
<1st release>
|
25.May.2012 |