Visual Software Suite
This software allows you to use the following functions by utilizing media processors or projectors.
■ Installation and Adjustment functions
For media processors and projectors, advanced screen adjustments can be performed as follows.
If you use Auto Screen Adjustment, you can make multiple adjustments, including geometry correction, by performing operations according to on-screen instructions.
- Auto screen adjustment
- Geometry correction
- Content splitting
- Edge blending
- Black level adjustment
- Uniformity
- Color matching
- Masking
■ Content management functions
For media processors, content playback can be performed automatically by creating a playlist that combines multiple still image, movie and other content together as a single material and setting a playback schedule.
- Registering content
- Creating playlist
- Checking playlist
- Creating timetable
- Creating schedule
- Sending schedule
[ Note for Projector ] 
This software cannot control the following projectors. If you need to control them, please use Geometry Manager Pro.
PT-DZ21K2/ DS20K
PT-DZ21K/ DS20K
PT-DZ13K/ DS12K/ DZ10K
PT-DZ780
PT-DZ870
PT-MZ880/ MZ780/ MZ680
PT-MZ882/ MZ782
[ Applicable Models and Version ]
| ET-FMP50 | Main version 4.000 or later |
| ET-FMP20 | Main version 4.000 or later |
| ET-SBFMP10 | Main version 4.000 or later |
PT-RQ50K
PT-RQ35K2/ RQ35K/ RZ34K2/ RZ34K
PT-RQ32K/ RZ31K/ RS30K
PT-RQ25K/ RZ24K/ RQ18K/ RZ17K
PT-RZ14K
PT-RQ22K/ RZ21K/ RS20K
PT-RZ16K
PT-RQ13K/ RZ12K/ RS11K
PT-REQ15/ REQ12/ REQ10/ REQ80/ REZ15/ REZ12/ REZ10/ REZ80
PT-RQ7/ RQ6/ RZ7/ RZ6
PT-RCQ10/ RCQ80
PT-RZ120
PT-RZ990/RZ890/ RZ790/ RZ690
PT-RZ970
PT-RZ870
PT-RZ770/ RZ660
PT-RZ670
PT-MZ20K/ MZ17K/ MZ14K/ MZ11K
PT-MZ16K/ MZ13K/ MZ10K
[ Update History ]
[ Latest Version ]
| Visual Software Suite Ver.2.0.60 |  |
[ Updated date ]
31.Oct.2025
[ Manual ]
| Introduction |  |
| Installation and Adjustment | |
| Content Management | |
[ System Requirements ]
| OS | Microsoft Windows 11 (Windows 11 Home/Pro 64bit) Microsoft Windows 10 (Windows 10 Home/Pro 64bit) |
| CPU | Intel Core i5 (4-core) or higher |
| Memory | 16GB or more |
| Available disk space | 16GB or more (further available space is necessary to save content data) |
| Display | Resolution of 1600x900 pixels or higher |
| USB port | USB 2.0 or higher (when performing auto screen adjustment using a camera connected by USB) |
| LAN port | 100Base-TX/1000Base-T |
| Switching hub | Must support PoE (Power over Ethernet) power supply (IEEE802.3af), and have a power supply compatible port that supports 1000BASE-T (when performing auto screen adjustment using a camera connected by LAN) |
[ Note ]
- Smooth playback of movies may not be possible even in the above environment. When handling high-resolution movies, we recommend an Intel Core i5 CPU or higher that is 11th generation of later.
- Note that the operation is not guaranteed when used in any system environment other than above (GPUs other than those manufactured by Intel, etc.), or when a home-made computer is used.
| This does not guarantee the operation with all the computers fulfilling above conditions. |
[ Applicable Cameras ]
| USB connected camera | Nikon | D5200/ D5300/ D5500/ D5600/ D7500/ Z50/ Z5 |
| LAN connected camera | IDS | GV-5890CP-C-HQ (*1)(*2) |
*1 Please update the camera firmware to version 3.30.21242 or later.
*2 Please install the standard setup package of IDS peak 2.17.0 or later before using the application.
IDS Imaging Development Systems GmbH Software 
･ For updating the firmware version or changing the IP address, please refer to the manual on the same page.
[ Recommended Lens ]
When using Nikon D5200/D5300/D5500/D5600/D7500
Normal zoom lens (Angle of view: 29-76°) AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR
Wide-angle zoom lens (Angle of view: 70-109°) AF-P DX NIKKOR 10-20mm f/4.5-5.6G VR
Wide-angle zoom lens (Angle of view: 61-109°) AF-S DX NIKKOR 10-24mm f/3.5-4.5G ED
High-power zoom lens (Angle of view: 12-76°) AF-S DX NIKKOR 18-140mm f/3.5-5.6G ED VR
Normal zoom lens (Angle of view: 29-76°) AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR II (*3)
Normal zoom lens (Angle of view: 29-76°) AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR(*3) (*4)
When using Nikon Z50
Normal zoom lens (Angle of view: 31°30′-83°) NIKKOR Z DX 16-50mm f/3.5-6.3 VR
When using Nikon Z5
Normal zoom lens (Angle of view: 31°30′-61°) NIKKOR Z 24-50mm f/4-6.3
- Vibration reduction switch with VR lenses should be OFF (VR=OFF).
Proper adjustment is not guaranteed using vibration reduction mode. - Other standard lens, wide-angle lens and telescopic lens other than listed above can be applied.
Use low distortion and autofocus lens.
However, Panasonic does not guarantee proper adjustment with them. - Special-purpose lens such as micro lens or fish-eye lens are not compatible.
- When using Z50 and Z5, combining it with an F-mount lens using a mount adapter does not guarantee correct operation.
When using IDS camera
KOWA OPTRONICS LM3JC10M
KOWA OPTRONICS LM5JC10M
KOWA OPTRONICS LM8JC10M
KOWA OPTRONICS LM12JC10M
･ Please fix the adjustment screw at the position where the lens focus setting is ∞m and the aperture setting is
between 8 and 16.
*3 The camera "C" firmware version 1.01 or newer must be applied on D5300 / D5500 / D5600.
*4 The Optical VR option in the camera menus should be turned off on D5300 / D5500 / D5600 / D7500.
Nikon Corporation Download Center
[ Trademarks ]
- Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
- Other company names, product names or other names noted in this site are trademarks or registered trademarks of the respective companies. Note that ® and TM marks are not indicated in the text of this site.
 Page Top |