Auto Screen Adjustment plug-in
Applying the ET-CUK10/CUK10P Auto Screen Adjustment upgrade kit to the
projector expands the functions of Geometry Manager Pro, and allows automatic
adjustment of geometry correction, edge blending, color, and brightness
according to the shape of the screen though use of an externally connected
camera.
After performing Auto Screen Adjustment, you can perform further detailed adjustment and correction manually.
- Both latest version's Geometry Manager Pro and the this plug-in software must be installed to use the Auto Screen Adjustment function.
- The Auto Screen Adjustment upgrade kit required to enable the Auto Screen Adjustment function
| Product Number | Product Name | Description |
|---|---|---|
| ET-CUK10 | Auto Screen Adjustment upgrade kit |
Activating on each projector enables the "Auto Screen Adjustment plug-in software" functions. |
| ET-CUK10P | Auto Screen Adjustment upgrade kit (PC) |
Activating on computer on which the software is installed enables the "Auto Screen Adjustment plug-in software" functions. |
- To use the Auto Screen Adjustment function, prepare a camera separately.
- Use a LAN connection when using the Auto Screen Adjustment function.
- Please see for details "Activation" (page 12) and "Auto
Screen Adjustment" (page 111) of an Geometry Manager Pro's operation
manual.
[ Note for Projector ] 
When the firmware versions of projector are not the following conditions, the function of automatic screen adjustment cannot be used. In that case, update the firmware of a projector.
[ Applicable Projector Models and Version ]
| PT-DZ21K2/ DS20K2, PT-SDZ21K2C/ SDS20K2C | --- |
| PT-DZ21K/ DS20K, PT-SDZ21KC/ SDS20KC | Firmware version 4.0 or later |
| PT-DZ13K/ DS12K/ DZ10K, PT-SDZ985C/ SDS955C/ SDZ981C | Firmware version 3.0 or later |
| PT-DZ780, PT-FDZ88C/ FDZ675CB | --- |
| PT-DZ870, PT-FDZ97C | Firmware version 3.0 or later |
| PT-RQ7/ RQ6, PT-FRQ75C/ FRQ65C (*2) | --- |
| PT-RQ50K (*4) | --- |
| PT-RQ35K2, PT-RZ34K2 (*2)(*3) | --- |
| PT-RQ35K/ RZ34K, PT-SRQ35KC/ SRZ34KC | --- |
| PT-RQ32K, PT-SRQ32KC (*1) | --- |
| PT-RQ25K/ RQ18K, PT-SRQ25KC/ SRQ18KC (*4) | --- |
| PT-RQ22K, PT-SRQ22KC (*1) | --- |
| PT-RZ24K/ RZ17K, PT-SRZ24KC/ SRZ17KC (*4) | --- |
| PT-SRQ32KCYR/ SRQ32KCYL (*1) | --- |
| PT-RQ13K, PT-SRQ13KC (*1) | --- |
| PT-RCQ10/ RCQ80 | --- |
| PT-REQ15/FEQ150C (*2)(*4) | --- |
| PT-REQ12/REQ10/REQ80, PT-FEQ120C/FEQ100C/FEQ080C (*4) | --- |
| PT-REZ15/FEZ150C (*2)(*4) | --- |
| PT-REZ12/REZ10/REZ80, PT-FEZ120C/FEZ100C/FEZ080C (*4) | --- |
| PT-RZ31K/ RS30K, PT-SRZ31KC/ SRS30KC/ SRZ300C | --- |
| PT-RZ21K/ RS20K, PT-SRZ21KC/ SRS20KC | --- |
| PT-RZ16K | --- |
| PT-RZ14K (*4) | --- |
| PT-RZ12K/ RS11K, PT-SRZ12KC/ SRS11KC | --- |
| PT-RZ120, PT-FRZ120C | --- |
| PT-RZ990/RZ890/RZ790/RZ690, PT-FRZ99C/FRZ89C/FRZ79C/FRZ69C | --- |
| PT-RZ970, PT-FRZ98C | --- |
| PT-RZ870, PT-FRZ88C | --- |
| PT-RZ770/ RZ660, PT-FRZ78C | --- |
| PT-RZ670, PT-FRZ68C | --- |
| PT-MZ16K/ MZ13K/ MZ10K | --- |
| PT-MZ17K/MZ14K/MZ11K, PT-SMZ17KC/SMZ14KC/SMZ11KC (*4) | --- |
| PT-MZ20K, PT-SMZ20KC (*4) | --- |
| PT-SRZ33KC (*2) | --- |
| PT-SXP10K10 | --- |
(*1) There are restriction to use auto-screen adjustment function,
please make sure the following settings before using.
1) [QUAD PIXEL DRIVE] needs to be [ON]
2) [SIMUL INPUT SETTING] needs to be [OFF]
For more detail information, please refer to the operation manual of the projector.
(*2) Connection with these models requires this plug-in version 6.0 or later.
A 64-bit Windows is required to install this plug-in version 6.0 or later.
If you are using a 32-bit Windows, please use Auto Screen Adjustment plug-in version 5.7.15.
(*3) When connecting to these models, set [COMMAND PROTECT] to [ENABLE(MD5)] by one of the following procedures:
･OSD menu : [NETWORK]->[NETWORK SEQURITY]->[COMMAND PROTECT]
･WEB Control : [COMMAND PROTECT] on the [Network Security] page
For details, check the projector’s instruction manual.
(*4) If the firmware of the projector is the following version or later, please take the measures described above (*3).
PT-RQ25K/ RQ18K/ SRQ25KC/ SRQ18KC : Ver.4.00
PT-RZ24K/ RZ17K/ SRZ24KC/ SRZ17KC : Ver.4.00, PT-RQ50K : Ver.4.00
PT-RZ14K : Ver.4.00
PT-REQ15/FEQ150C : Ver.3.00, PT-REZ15/ FEZ150C : Ver.3.00
PT-REQ12/ REQ10/ REQ80/ FEQ120C/ FEQ100C/ FEQ080C : Ver.4.00
PT-REZ12/ REZ10/ REZ80/ FEZ120C/ FEZ100C/ FEZ080C : Ver.3.00
PT-MZ20K/ MZ17K/ MZ14K/ MZ11K/ SMZ20KC/ SMZ17KC/SMZ14KC/SMZ11KC : Ver.2.00
Applicable Models :
(*3) PT-RQ35K2/ RZ34K2
(*4) PT-RQ25K/ RQ18K/ SRQ25KC/ SRQ18KC/ RZ24K/ RZ17K/ SRZ24KC/ SRZ17KC
PT-RQ50K, PT-RZ14KJ, REQ15/FEQ150C, PT-REZ15/ FEZ150C
PT-REQ12/ REQ10/ REQ80/ FEQ120C/ FEQ100C/ FEQ080C
PT-REZ12/ REZ10/ REZ80/ FEZ120C/ FEZ100C/ FEZ080C
PT-MZ20K/ MZ17K/ MZ14K/ MZ11K/ SMZ20KC/ SMZ17KC/SMZ14KC/SMZ11KC
[ Applicable Cameras ]
| Nikon | D5200/ D5300/ D5500/ D5600/ D7500/ Z50/ Z5 |
| Panasonic | AW-HE40/ AW-HE38/ AW-HE35/ AW-HN40/ AW-HN38/ AW-UE70 |
| AW-UE65/ AW-UE63/ AW-UN70 |
* Panasonic cameras can only be used with Live View function.
[ Recommended Lens ]
When using Nikon D5200/D5300/D5500/D5600/D7500
Normal zoom lens (Angle of view: 29-76°) AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR
Wide-angle zoom lens (Angle of view: 70-109°) AF-P DX NIKKOR 10-20mm f/4.5-5.6G VR
Wide-angle zoom lens (Angle of view: 61-109°) AF-S DX NIKKOR 10-24mm f/3.5-4.5G ED
High-power zoom lens (Angle of view: 12-76°) AF-S DX NIKKOR 18-140mm f/3.5-5.6G ED VR
Normal zoom lens (Angle of view: 29-76°) AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR II (*1)
Normal zoom lens (Angle of view: 29-76°) AF-P DX NIKKOR 18-55mm f/3.5-5.6G VR(*1) (*2)
When using Nikon Z50
Normal zoom lens (Angle of view: 31°30′-83°) NIKKOR Z DX 16-50mm f/3.5-6.3 VR
When using Nikon Z5
Normal zoom lens (Angle of view: 31°30′-61°) NIKKOR Z 24-50mm f/4-6.3
- Vibration reduction switch with VR lenses should be OFF (VR=OFF).
Proper adjustment is not guaranteed using vibration reduction mode. - Other standard lens, wide-angle lens and telescopic lens other than listed above can be applied.
Use low distortion and autofocus lens.
However, Panasonic does not guarantee proper adjustment with them. - Special-purpose lens such as micro lens or fish-eye lens are not compatible.
- When using Z50 and Z5, combining it with an F-mount lens using a mount adapter does not guarantee correct operation.
*1 The camera "C" firmware version 1.01 or newer must be applied on D5300 / D5500 / D5600.
*2 The Optical VR option in the camera menus should be turned off on D5300 / D5500 / D5600 / D7500.
Nikon Corporation Download Center 
[ Update History ]
[ Latest Version ]
| Auto screen Adjustment plug-in ver.6.1.17 |  |
| < For a 32-bit Windows > Auto screen Adjustment plug-in ver.5.7.15 |
|
[ Updated date ]
11.Jul.2025
[ Geometry Manager Pro Manual ]
| Operating Instructions (English) | |
| Operating Instructions (Chinese) | |
| < For a 32-bit Windows > | |
| Operating Instructions (English) | |
| Operating Instructions (Chinese) | |
[ System Requirements ]
| Geometry Manager Pro version 7.0 or later | Geometry Manager Pro version 6.7.15 | |
| OS | Microsoft Windows 10 Home 64bit Windows 10 Pro 64bit Windows 11 Home 64bit Windows 11 Pro 64bit Compatible with English, Japanese or Chinese language versions of the above operating systems. |
Microsoft Windows 10 Home 32bit/64bit Windows 10 Pro 32bit/64bit Windows 11 Home 64bit Windows 11 Pro 64bit Compatible with English, Japanese or Chinese language versions of the above operating systems. - For a 64bit OS, this application runs on WOW64. |
| CPU | At least minimum required by OS | |
| Memory | At least minimum required by OS | |
| Available disk space | 16GB or greater (Further available space is necessary to save projector information.) | |
| Other requirements | A display with resolution of 1600 x 900 pixel or higher using High Color (16bit) or higher LAN port for a wired LAN (10Base-T / 100Base-TX / 1000Base-T) USB 2.0-compatible port or higher |
|
[ Note ]
- Please understand that operation is not guaranteed if this software application is used in a system environment other than that specified above or on a home-built computer.
| Proper operation cannot be guaranteed for all computers even if they satisfy the above requirements. |
[ Trademarks ]
- Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
- Other company names, product names or other names noted in this site are trademarks or registered trademarks of the respective companies. Note that ® and TM marks are not indicated in the text of this site.
 Page Top |